ASHLAND OIL,INC -- MAC'S THERMO-AID #7100 -- 6850-00N006261
===================== Product Identification ===================== Product ID:MAC'S THERMO-AID #7100 MSDS Date:01/01/1985 FSC:6850 NIIN:00N006261 === Responsible Party === Company Name:ASHLAND OIL,INC Address:1409 WINCHESTER AVE Box:391 City:ASHLAND State:KY ZIP:41114 Country:US CAGE:81355 === Contractor Identification === Company Name:ASHLAND INC Address:1409 WINCHESTER AVE Box:391 City:ASHLAND State:KY ZIP:41114 Country:US Phone:800-622-6846 CAGE:81355 ============= Composition/Information on Ingredients ============= Ingred Name:ISOPROPYL ALCOHOL (SARA III) CAS:67-63-0 RTECS #:NT8050000 Fraction by Wt: >60% OSHA PEL:400 PPM/500 STEL ACGIH TLV:400 PPM/500STEL;9192 ===================== Hazards Identification ===================== Effects of Overexposure:EYE/SKIN: IRRIT. VAPOR: RESP TRACT IRRIT,DIZZY,NAUSEA,HEADACHE. INGESTION: GI IRRIT,VOMIT,DIARRHEA ======================= First Aid Measures ======================= First Aid:EYE: FLUSH WITH WATER 15 MIN,CONSULT PHYSICIAN. SKIN: WASH WITH SOAP & WATER,REMOVE CONTAMINATED CLOTHING. INHALATION: REMOVE TO FRESH AIR,GIVE ARTIF RESP IF NEEDED,CALL PHYSICIAN. INGESTION: GIVE TWO GLASSES WATER,INDUCE VOMITING,CALL PHYSICIAN. ===================== Fire Fighting Measures ===================== Flash Point:63F/17C (CC) Lower Limits:2.0 Extinguishing Media:DRY CHEMICAL,ALCOHOL FOAM Fire Fighting Procedures:SELF-CONTAIN BREATH APP,WATER OR FOAM MAY CAUSE FROTHING. Unusual Fire/Explosion Hazard:VAPORS MAY TRAVEL ALONG GROUND TO DISTANT IGNITION SOURCES AND FLASH BACK TO MATERIAL ================== Accidental Release Measures ================== Spill Release Procedures:ELIMINATE IGNITION SOURCES. EXCLUD PERSONS WITHOUT PROTECTIVE EQUIPMENT. STOP SPILL AT SOURCE,DIKE TO PREVENT SPREADING,PUMP LIQUID TO SALVAGE TANK,ABSORB REMAINING LIQUID ON ABSORBENT MATERIAL,ANDK S HOVEL INTO CONTAINERS. ====================== Handling and Storage ====================== Handling and Storage Precautions:STORE AWAY FROM HEAT & OTHER IGNITION SOURCES. DO NOT SMOKE,WELD,FLAME CUT OR BRAZE IN AREA OF USE. Other Precautions:EMPTY CNTAINERS RETAIN PRODUCT RESIDUES WHICH MAY BE HAZARDOUS. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH EXPOSURE OF CONCERN. Ventilation:LOCAL/MECHANICAL TO MAINTAIN BELOW TLV. Protective Gloves:CHEM RESISTANT Eye Protection:CHEM SPLASH GOGGLES Other Protective Equipment:IMPERVIOUS CLOTHING & BOOTS Supplemental Safety and Health ================== Physical/Chemical Properties ================== Boiling Pt:B.P. Text:176F/80C Vapor Pres:33 Vapor Density:2.07 Spec Gravity:<1 Evaporation Rate & Reference:<1 (ETHER) Percent Volatiles by Volume:>60 ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG OXIDIZING AGENTS Hazardous Decomposition Products:CO,CO*2,VARIOUS HYDROCARBONS ==================== Disposal Considerations ==================== Waste Disposal Methods:COMPLY WITH LOCAL,STATE AND FEDERAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.